Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Engine Mechanical
Model Year: 2008 Model: Sequoia Doc ID: RM000002BRK00GX
Title: 2UZ-FE ENGINE MECHANICAL: REAR CRANKSHAFT OIL SEAL: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for 2WD)

(a) Remove the automatic transmission assembly A750E AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: REMOVAL (2008 Sequoia) .

2. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for 4WD)

(a) Remove the automatic transmission assembly A750F AUTOMATIC TRANSMISSION / TRANSAXLE: AUTOMATIC TRANSMISSION ASSEMBLY: REMOVAL (2008 Sequoia) .

3. REMOVE DRIVE PLATE AND RING GEAR SUB-ASSEMBLY 2UZ-FE ENGINE MECHANICAL: ENGINE ASSEMBLY: REMOVAL (2008 Sequoia)+

4. REMOVE REAR CRANKSHAFT OIL SEAL

(a) Using a knife, cut off the lip of the oil seal.

(b) Using a screwdriver, pry out the oil seal.

NOTICE:

Do not damage the surface of the oil seal press fit hole and crankshaft.

HINT:

Tape the screwdriver tip before use.